Features:
1. The display of temperature and time adopts the latest LCD module.
2. High-precision digital electronic sensors are used, ensuring high accuracy and precision of water bath temperature without calibration.
3. Overheating alarm and automatic protection for monitoring water bath temperature.
4. The lifting device of the disintegration tester's basket is designed to be simple and easy to use.

Precautions:
1. Place the disintegration tester on a solid and vibration-free operating table to prevent the instrument from shaking during operation due to an unstable table, which may affect the accuracy of the experimental results.
2. The environment should be dry and well-ventilated to avoid moisture damage to the instrument and prevent electrical component damage or leakage due to dampness, which may cause safety hazards.
3. Ensure that the power supply has a good ground connection. This is an important measure to ensure the safety of the user and the normal operation of the instrument, and can effectively prevent leakage accidents.
4. Do not activate the heating function when the water tank is empty, as this may damage the heater and even cause a fire or other safety accidents.
5. When filling the water tank, the water level should be moderate, neither too high nor too low.
6. After each use, thoroughly clean all the crevices and corners of the instrument to avoid damage caused by residual powder or other impurities, which may affect the service life of the instrument and the accuracy of the next experiment.
7. Calibrate the instrument according to the specified calibration cycle to ensure that all performance indicators meet the requirements and guarantee the reliability of the experimental results.
8. During operation, be careful not to touch the electrified parts to prevent electric shock accidents.
9. When plugging or unplugging power cords, sensors, and other plugs, ensure correct and gentle operation to avoid damaging the plugs or causing poor contact due to excessive force, which may affect the normal use of the instrument.
10. If the disintegration tester is not going to be used for a long time, unplug the power cord to reduce energy consumption and prevent potential safety issues caused by prolonged power-on.