Electric Heating Constant Temperature Drying Oven

1. The intelligent digital display temperature control is adopted, featuring a precise temperature control system and simple and convenient operation.
2. The rear blast circulation heating is employed for uniform heating, rapid temperature increase and small temperature difference.
3. The timer function is available, enabling the setting of drying time as required.
4. High-temperature silicone rubber sealing strips are provided to effectively prevent heat loss.
5. The interior is constructed with corrosion-resistant materials to accommodate different chemical environments.
6. It is capable of adapting to a wide temperature range to satisfy the drying demands of various items.
7. Double-layer glass observation windows are installed for convenient observation of the drying conditions of the items.

Precautions :
1. The outer casing of the oven must be effectively grounded to ensure safe use.
2. Before use, check the equipment for any damage or abnormalities, such as broken wires or malfunctioning switches.
3. Check if the fan is operating normally and listen for any abnormal noises or vibrations.
4. The power supply should be AC 220V ± 22V, frequency 50HZ ± 1HZ. Some models may require a 380V (three-phase four-wire) power supply.
5. The drying oven is not equipped with an explosion-proof device and flammable or explosive items must not be placed inside.
6. The drying oven should be placed in a well-ventilated room with an ambient temperature between 5°C and 40°C. Flammable or explosive items should not be placed around it.
7. Do not overcrowd the items inside the oven. Leave some space to facilitate the circulation of hot air.
8. Do not exceed the maximum load capacity of the drying oven to avoid affecting the heating efficiency and the lifespan of the equipment.
9. Set the temperature correctly according to the drying requirements of the items to prevent damage to the items or safety accidents caused by excessively high temperatures.
10. Regularly check the drying status of the items during the drying process to avoid over-drying. Do not leave the drying oven running unattended for a long time to prevent accidents.
11. After the drying process is completed, do not open the oven door immediately. Allow the temperature inside to drop naturally to prevent sudden temperature changes from affecting the items.
12. Turn off the power supply after use.
13. Regularly clean the drying oven to keep the interior dry and prevent rust and contamination.
14. Regularly clean the dust and debris from the ventilation ports to ensure good ventilation and even heat distribution.
15. Regularly calibrate the temperature and humidity sensors to ensure measurement accuracy.
17. Check the wires for any damage or aging. Replace them if necessary.